Nebulisers are devices to help you breathe easily. They are used to help you treat upper, middle, and lower respiratory tract diseases. When choosing your nebuliser, take into consideration the age of the user, the size of the particles, and the intensity of the usage.
What does a nebuliser do for you? Nebulisers can be used with prescribed medicines to open up your airways, or with saline solution to keep your nose clean and prevent mild symptoms from escalating into a severe lung condition.
There are different types of nebulisers: Nozzle (generates compressed air with tiny particles), Ultrasonic (generates small particles through high frequency vibrations), and Mesh (generates aerosol of small droplets).
OMRON’s wide range of nebulisers can help you choose the right one according to your needs. Whether home-based or portable, nozzle, mesh (membrane) or ultrasonic, we have the right device for you.
Discover ways to enable yourself to live a more fulfilling life with our healthy living and lifestyle tips.
Most medications for the treatment of respiratory diseases of the upper, middle and lower airways are available on a liquid form and can therefore be used with a nebuliser. Nebulisers also allow mixing different medications in the nebuliser chamber, so that they can be inhaled at the same time for a higher convenience.
Depending on the type of nebuliser, the nebuliser can contain several pieces:
• The main unit or compressor
• The nebuliser kit where the medication is added
• The tube that connects the main unit with the nebuliser kit
• Mesh cap
• Mouth piece to inhale medication through the mouth
• Nose piece to inhale medication through the nose
• Air filter
Note: Always refer to the cleaning instructions as included in the instruction manual of the nebuliser.
It is recommended to clean the nebuliser kit, mouth piece, nose piece and mask after each use (but necessary after every day of formal use). They can be washed with warm water and a mild detergent. Then, you should rinse them thoroughly with clean hot tap water and allow to air dry in a clean place.
Disinfection should be done once a week. This can be done by boiling these parts for approximately 10 minutes except for PVC parts (some masks and tubes) which can harden and deform when this is done. Alternatively, use commercially available disinfectant. Thoroughly rinse with clean water after disinfection; follow the instructions given by the supplier of the disinfectant.
The casing of main unit and the tube do not require extensive cleaning, but can of course be cleaned using a soft cloth with water and a mild detergent. Wipe the casing and immediately dry using a soft clean cloth.
The air filter should not be washed. In case it was to become wet it should be replaced to avoid blockages.
Specifically, for a mesh nebuliser: the mesh cap should be cleaned after each use:
• Fill the medication container with water and nebulise the water. To prevent medication from drying and adhering to the mesh after use, nebulise the water for 1 to 2 minutes.
• Then wash the mesh cap in mild (neutral) detergent, and rinse with clean water. Allow to air-dry in a clean place.
For most nebulisers, it is recommended to replace the nebuliser kit, the mouth and nose piece, masks and tube every year. Air filters should be replaced approximately every 60 days. Specifically, for the mesh nebuliser, it is recommended to exchange the mesh cap after approximately 1 year.
Nebulisers are appropriate for the use of babies and children.